Working site of Concrete roller paver machine

main feature：

1. Thick steel pipe seamless steel pipe is characterized by no welding, no collapse, and no deformation.

2. Joystick control, one-key operation, simple, convenient and labor-saving.

3. The motor adopts the national standard pure copper core motor.

4. The vibration frequency of the eccentric shaft is high, and the chamber effect is good.

maintence attention items：

1.Never allow any concrete to harden on the Rollers and Auger otherwise it will affect the finishing and levelling the next time the machine is put in operation.

2.Immediately after use, wash any concrete off the machine. Be careful not to spray water on the electric motors while they are still hot.

3.Grease and oil all bearing and chain links regularly.

4.Change oil (No. 46/40) in gear reduction box, on chain after every 100hrs. Check grease in all bearing once a week.

5.Check V-belts, chains and all screws fastened every day before use.

6.Check all wiring connections and wire condition every day before using the machine. (No loose connections or electrical sparking must be observed.) Check power supply every day. (If power generator is used, see that the output power from the generator is as per the motor specifications.)

7.If the machine has to lie down for a longer period, then please place the machine on a level ground. Put even support under the rollers so that they do not get deformed.

8.Please use transportation to move the machine from one working site to the other.